FINISH INTERIOR COATING

LIFE PAINT

High quality water based paint, mainly made of acrylic resins, gives a unique matt finish, semi-glossy, high glossy

The mass density is approximately 1.2 g/cm3.
Solid contents are approximately 25% +/- 2% by volume.
The optimum thickness of the layer is 25-30 microns.
Theoretical diffusion rate is approximately 10 m 2 / liter with a thickness of 30 microns
This depends on the nature, condition of the surface, and the method of coating used.
Dryness of the texture, approximately one hour.
The time required for painting above is a minimum of 4 hours.
The period of preservation is 18 months (in a cool dry place).
The available volume is 20 liters.

New surfaces mainly coated

Concrete, smooth, concrete, gypsum and gypsum boards should be coated, clean and dry.
Sanding is recommended before and between layers.
All dirt and dust should be removed from surfaces before painting the final finishing layers.

Previously painted surfaces

The surface must be free from defective paint layers and weak adhesion.
The good layers should be washed with ammonia solution with 3% concentration.
It is not recommended to use it over glossy paint layers or types of oil paints
Exposed or repaired areas should be painted primarily before painting
The optimum finishes are coated with two layers with a dry layer thickness of 25-30 microns

Instructions For Use

Brush and Roller

Used Diluent fresh water

The Volume of the diluent is apperoximately 0-5%