• The mass density is approximately 1.69 g/cm3.
• Solid contents are approximately 25% +/- 2% by volume.
• The optimum thickness of the layer is 30 microns.
• The theoretical prevalence rate is approximately 11.7 m 2 / liter with a thickness of 30 microns depending on
• The nature, condition of the surface, and the method of coating used.
• Dryness of the texture, approximately 30 minutes.
• The time required for painting is a minimum of two hours.
• Maximum – No Limits.
• The period of preservation is 18 months (in a cool dry place).
• The available volume is 20 liters.

• Concrete, smooth, concrete, gypsum and gypsum boards should be coated, clean and dry.
• Sanding is recommended before and between layers.
• All dirt and dust should be removed from surfaces before painting the final finishing layers.

The surface must be free from defective paint layers and weak adhesion.

• The good layers should be washed with ammonia solution with 3% concentration.
• It is not recommended to use it over glossy paint layers or types of oily and glossy paints
• Exposed or repaired areas should be painted primarily before painting
  Instructions for use
  Brush and Roller:
  Used diluent fresh water
  The volume of the diluent is approximately 50%.